VARGLINK
Stark Varg FAQ › Maintenance

Is it enough to change the fork oil by just unscrewing the fork leg nut, draining the oil and pouring in new oil?

No, that's not enough. This only drains the outer circuit, while the closed circuit (the cartridge) stays as it is. You need to open both the cartridge and the outer circuit, flush them, lubricate the seals, and unscrew the piston from the cartridge. The fork leg is held in a vise while you do this. Some of the tools can be 3D-printed. If you don't have the tools, it's better to take the fork to a shop.

from the Stark Varg chat
Didn't find an answer? Ask the bot @starkvarg_help_bot or the Stark Varg chat (in Russian).