What is the top speed of the Stark Varg (MX, EX) and what are the stock sprockets? How do sprockets change top speed?
Stock sprockets and top speed
- MX 1.2 — sprockets 14/47. The manual says 154 km/h, but on stock sprockets it's actually about 160–165 km/h.
- EX — sprockets 12/48, shorter gearing for enduro. The manual says 129 km/h, in reality about 130–136 km/h.
- First-generation MX — sprockets also 14/47. The manual says 110 km/h, but that figure is understated: in reality it's about 160–165 km/h (the motor spins up to 14,200 rpm, calculated ~165).
- SM — sprockets 15/47, chain 520, 114 links. Top speed according to Stark — 154 km/h (96 mph). Tires 120/70-17 and 140/70-17 (rear about 628 mm). For the SM, figures are calculated proportionally from 154 at 15/47: 16/47 — about 164 km/h, 15/45 — about 161 km/h.
How sprockets change speed
Top speed is proportional to the front/rear ratio: new ≈ old × (new front/rear) ÷ (old front/rear). One more tooth on the front gives about +7% speed, one tooth less on the rear gives about +2%. You get less pull down low. This is theory: in reality load, wind, tire pressure all matter, and after a sprocket change the speedometer is off proportionally.
Calculation for MX and EX: the motor spins up to 13,900 rpm, the primary ratio is about 3.29, wheel circumference is about 2.14 m.
- 14/47 — about 162 km/h
- 14/48 — about 158 km/h
- 13/47 — about 150 km/h
- the first MX spins up to 14,200 rpm — about 2% faster on the same sprockets
- EX on 12/48 — about 136 km/h, on 13/48 — about 147 km/h, on 14/47 — about 162 km/h, same as the MX
from the Stark Varg chat · 09.11.2026