VARGLINK

Stark Varg charging from your phone

VargLink sets the charging power and charge limit, charges on a schedule and by a set time, protects your generator and lets you control charging from the website when you’re away from the bike. Works on firmware 1.15 too.

Android 8.0 and newer · free

Power and limit

  • charging power from 0.3 to 3 kW and the limit where charging stops;
  • ready Storage Charge (60 % — for storage) and Full Charge profiles, plus your own;
  • the main screen shows power, battery temperature, imbalance and the time left to the limit;
  • on the stock Stark phone the charging screen opens over Varg when charging starts.

Schedule

Rules by day of the week: switch a profile on at a set time or “Ready by” — charge by the hour you need. VargLink works out the start time from the battery capacity, which it refines from past charges. If the bike isn’t connected, the app connects, applies the setting and disconnects.

Charging from a generator

An inverter generator running at its limit overloads, and once it recovers the bike immediately asks for full power again — and it repeats. Generator mode starts at 1 kW and adds 0.2 kW every 30 seconds; if the current drops it goes straight back to 1 kW and ramps up again. After three overloads in 30 minutes the ceiling drops by 0.2 kW and is remembered.

Website, Telegram and smart plugs

  • a phone with VargLink left by the bike sends data to the website: charge and charging settings from any browser;
  • charging notifications in Telegram — and control from there too;
  • Smart Life and Tuya smart plugs: switch the charger off after charging, even with no phone nearby;
  • charge, power and temperature in Home Assistant.
Stark Varg charging from your phoneStark Varg charging from your phone

Related questions

More VargLink features

Stark Varg is a trademark of Stark Future S.L. VargLink is an independent app, not affiliated with Stark Future.